Step-by-Step Setup Linksys AP

Step-by-step setup linksys AP:

  

1. Configure as follows: Speedy Telkom (Internet Network)-Modem ADSL-Linksys-CPU/Laptop

2. TP-LINK modem settings:

• Plug the modem cable to the LAN port.
• Type in http://192.168.1.1 in a web browser (Mozilla fiorefox, iexplore, flock, etc.).
• Login: admin, password: admin
• Speedy setting does not need to change, just turn off the DHCP server.
• DNS is first loaded by the technicians speedy. Usually: 202.134.1.10 and 202.134.0.155 Note the two DNS addresses. DNS will be used on the router later.

3. Linksys router settings

•  Plug the cable into one of the linksys router's LAN ports.
• Type in http://192.168.1.1 in a web browser (Mozilla fiorefox, iexplore, flock, etc.).
• Default, Username: blank, Password: admin
• In the BASIC SETUP menu:

Choose a static IP

Internet IP Address: 192.168.1.99 (This is the Linksys IP that are recognized by the modem)

Subnet Mask: 255.255.255.0

Gateway: 192.168.1.1 (This is the gateway of the modem, which connects the port intermediaries to a speedy path)

Static DNS 1: 202.134.1.10 (As per the setting of speedy)

Static DNS 2: 202.134.0.155 (As per the setting of speedy)

Local IP Address: 192.168.2.1 (this is a Wireless-LAN IP of the Linksys router, which is recognizable by the client computer)

Subnet Mask: 255.255.255.0

Click Apply, and then continue

• Additional information:

If typing http://192.168.1.99 result would be similar to 192.168.2.1, because these two is the IP address of the router, for configuration.

DHCP Server: Enable

Starting IP Address: 192.168.2.100 (IP devices, such as your laptop will be given an IP when it is detected by a Linksys router)

Maximum Number of DHCP Users: 25 (fill with the desired number of clients)

Client Lease Time: 0 minutes (0 means one day)

WINS: 0.0.0.0

Press Apply, and then continue.

• In WIRELESS menu => Basic Wireless Settings

Network Mode: Mixed

Network Name (SSID): Satellite (according to your wishes, will appear on wifi laptop)

Radio Band: Auto

Wide Channel: Auto

Standard Channel: Auto

Wireless SSID Broadcast: Enable

Press Apply, and then continue

• In the SECURITY menu

If you want to use a password to connect:

Wireless => Wireless Security => Enabled

Select WEP, WPA, etc.

Fill passphrase. In WEP, the key will be generated, just select Key 1. Then use that key on the client computer. This is used to protect from theft of your Internet connection.

Press Apply, and then continue.

4.  Testing

• Click the start menu => programs => command prompt or click the start menu => RUN => type in cmd
• In the comand prompt type "ping 192.168.1.1" without the quotes (").
• If no reply, it means that the modem can wirelessly diconfigurasi
• Ping Ping 192.168.1.10 or 192.168.2.1
• If no reply, it means that the wireless router can be configured wirelessly.
• Ping www.google.com

If no reply means that you have your wireless connection is ready.

Description:

• Speedy connection to the modem using a telephone cable through a splitter.
• Kokeksi linksys modem to use the standard blue cable (RJ-45 LAN network cable).
• Linksys connection to a laptop, wireless, no wires needed.